Loading...
You are here:  Home  >  Pasture Health  >  Current Article

Adding and Spreading Pasture Nutrients With All Four Feet on the Ground

By   /  April 16, 2013  /  Comments Off on Adding and Spreading Pasture Nutrients With All Four Feet on the Ground

Want to improve your pastures? Work with your manure spreaders to get the good stuff on the ground!

    Print       Email

If you’re thinking you might want to spend some time and or money on your soil fertility, start with a soil test. That used to be right up there with “diet and exercise” and “floss daily” in terms of fun. But it doesn’t have to be as we pointed out in “Taking the Drudgery Out of Soil Testing.

Now that you’ve got your soil test results, take a look at your soil’s phosphorus and potassium (P and K).  Drawdown of P and K on pasture is a very long and slow process unless you’re cutting forage for hay or haylage.  If your soil test shows those two minerals below the optimum range for legumes, then and only then you should add those two nutrients. P and K are especially important if you are harvesting and removing forage. If you aren’t harvesting forages, and possibly if the pasture is not one you’d be able to run over with machinery, try to provide supplemental feed on that pasture. That can provide the net gain of nutrients your pasture is seeking.

These manure spreaders are all ready and waiting to get to work!

These manure spreaders are all ready and waiting to get to work!

One of the best tools you have for spreading nutrients in pasture is your herd.  Here are some tips to help them do their best:

  1. Provide portable water troughs in each paddock. Avoid placing the trough in the same place each time. Using 50’ or so of flexible hose on the end of the trough to help shift it to a new spot.
  2. Fence major paddocks along landforms, such as bottomland pasture, steep hillside pasture, and ridgeline pasture. This way, you won’t have the herd congregating at the top of the hill, for example. This can also be done to aid mechanical harvest.
  3. Avoid using permanent shade, where possible.
  4. Take care not to overfeed P in the total feed ration.  Is that mineral block containing P really needed?
  5. Supplement dairy pastures with a partial TMR* – DO NOT do the reverse; supplement TMR feeding with pasture forage.  There may be milk production reasons to use pasture as a supplement to a TMR, but then you are fishing and cutting bait at the same time, not really getting the true advantage of either.
  6. Rotate winter hay feeding areas to spread the nutrients around. Feeding the herd on frozen ground can provide additional nutrients and organic matter in the excess feed.
  7. Most of all, use shorter grazing periods. The more frequently the herd is moved, the more even the spread of manure. This can mean more management, but it can also mean better production. When dairy herds were given 85% of their day’s pasture before 1 pm, and then the final 15% was introduced in the early afternoon, they were inspired to graze from the high sugar forage when they may have been loafing. This lead to a 5% boost in milk production, which cost the farmer nothing more than a break wire.

*TMR – total mixed ration, various stored feedstuffs are mixed together and fed to dairy cows.

 

    Print       Email

About the author

Jim Cropper is the Executive Director of the Northeast Pasture Consortium, which works on helping guide the direction of future research keeping the needs of farmers and ranchers in mind. Before taking this position, he worked for the USDA Natural Resources Conservation Service for 36 years. His expertise includes creating tools and protocols to help farmers and ranchers monitor soils, pastures and hay crops. He authored sections of the National Range and Pasture Handbook and helped to develop protocols for the pastureland National Resource Inventory.

You might also like...

Easy Ways to Figure Out Your Pasture’s Forage Quality

Read More →