Thursday, March 28, 2024
HomeMoney MattersHow to Build a Walk-In Freezer

How to Build a Walk-In Freezer

Everyone knows how refrigeration works, right? There’s a big white box in our kitchens called a fridge, and it keeps stuff cold. Above the fridge is the freezer, which keeps things even colder. By the time we’re three years old, we know that one door is for the orange juice, and the other for the ice cream. What’s so complicated?

Of course, we soon  realize there’s more to it than that. But on a basic level, a standard 18 cubic foot refrigerator and a 3,200 cubic foot walk-in freezer (see below) are remarkably similar. They both depend on insulation, compressors, refrigerant and blowers to function. It’s like comparing a Mini Cooper to a tractor trailer: the concepts are the same, but you’ll never see a Mini towing a stainless steel tanker of fresh milk.

As a farmer who sells his food directly to the public, the importance of reliable refrigeration can hardly be overstated. Proper temperatures must be maintained for food safety, but I also need space to receive, organize and pack my products, all the while keeping food frozen. Just like a restaurant or a supermarket, having a large refrigerated space is crucial for farmers’ markets sales, or for CSA farms keeping product cold in advance of weekly pick ups. The following is a photo-blueprint of how we built our own walk-in from scratch, using standard 2X4 construction, our own labor, and two specialists who helped perfect it.

Building a walk-in freezer 1

You gotta start somewhere. Here, we’re building onto our existing freezer shed and loading dock, which house two conventional ‘locking panel’ walk-in freezers. Jim is laying out the footer dimensions with string. Excavation will follow.

How to build a walk-in freezer 2

Digging the footers. Things rarely go as planned, and I rented a jackhammer to break up some stubborn rocks. The bandana wins me style points.

3-1024x768

The footers are poured, the block laid, and next comes 4 inch pipe spaced at 4 foot intervals. This isn’t for drainage; it’s to allow warm air to flow beneath the slab so the penetrating cold (from the freezer above) won’t heave the subsoil and crack the concrete. (In photo #11, you’ll see the breather caps protruding above ground).

How to build a walk-in freezer 4

 Next, the gravel. This IS for drainage, to keep water away from the slab and provide a level area for the insulating foam sub-surface.

 How to Build a Walk-in Freezer 5

 The foam underlayer. Made partially of soy, this insulation is blown in a 4 inch thick sheet, and will provide insulation superior to the injected foam panels on my older walk-ins. This is sprayed by a specialist from tanks on a truck.

How to Build a Walk-in Freezer 6

A closer look at the foam. Once cured (about 2 days at 70 degrees), it becomes VERY firm… not as hard as concrete, but extremely rigid. Take special note that we left plenty of footer exposure along the edges. This will allow us to ‘tie’ this foam to fresh foam later on, after we’ve built the walls and ceilings. In effect, we’ll create a foam box within a wooden box (i.e., the building itself). Make sense?

How to Build a Walk-in Freezer 7

 Next, we pour our concrete slab OVER the foam. Told you the foam was solid! This will be our floor inside the walk-in, and the foam beneath will provide our insulation. This slab is 22×20 feet, and will later be treated with an anti-slip epoxy sealer.

How to Build a Walk-in Freezer 8

A closer look at the slab and foam. When exposed to sunlight for a few days, the foam turns from green to yellow.

Build a Walk-in Freezer 9

Next, we build on top of the remaining exposed footer. We’re building double walls here, one on the inside slab and one on the outside footer, the studs offset by six inches. This is important because it allows the foam to be sprayed in such a way that there’s no ‘break’ in the insulation. In other words, the foam will serpentine around the offset studs.

Build a walk-in 11

Here’s a closer look at the offset double wall studs. Notice how the underlaying foam remains exposed, so we can connect it to the next application of foam and complete our foam ‘box’ without any breaks.

10-768x1024

 Photo #11, showing the exposed pipe breathers.

13-1024x768

Once the foam expands, an assistant scrapes the 2×4 studs clean with a special knife, so the exterior sheathing will have a flat surface for nailing.

14-768x1024

An extra inch or two is added in the attic because we all know that heat rises! This is applied with less attention to aesthetics, as there will be no plywood sheathing here. Again, this foam looks soft but it’s almost rock-hard once cured.

 15-768x1024

Getting closer. Next, we glue and install glass board (you’ve seen this product in gas station restrooms), doubling as a moisture barrier as well as an easily cleanable surface.

 16-1024x768

Our second specialists, installing wiring, compressors and evaporators on the outside…

17-1024x768

 …and the fans and defrost coils on the inside. The freezer will be calibrated to an arresting 0 degrees fahrenheit. All of the interior walls will be sheathed in glass board, and shelves will be erected to store our meat.

18-1024x768

The nearly finished product. Still needs some grading and gutters, but no job is ever truly finished! We built it with a 60 inch door to accommodate a pallet jack. If everything goes as planned, it should serve our farm for many decades. The interior is 3,200 feet (19x21x8 interior), and will house thousands of pounds of beef, pork, lamb and chicken. The project cost $45,000 in labor and materials, funded 100% through sales at farmers’ markets.

Editors Note:  Be sure to check with your local zoning folks to make sure you have all the information you need for your area.

Your Tips Keep This Library Online

This resource only survives with your assistance.

Forrest Pritchard
Forrest Pritchardhttp://smithmeadows.com
Forrest Pritchard is a professional farmer and writer, holding degrees in English and Geology from the College of William and Mary. His farm Smith Meadows was one of the first “grass finished” farms in the country, and has sold at leading farmers’ markets in Washington DC for more than fifteen years. His book Gaining Ground, A Story of Farmers’ Markets, Local Food and Saving the Family Farm (Click HERE) was named a Top Read by The Washington Post and NPR. Forrest’s new book The Farmer In Your Kitchen: A Celebration Of Extraordinary Farms And Local Flavors is slated for release in Fall 2015, from the award-winning press The Experiment.

5 COMMENTS

    • Anne, yes, this is in Virginia, and we get quite humid here as well. I think it should do just fine with high humidity, although your defrost mechanism might kick on a little more often to remove ice build up.

Comments are closed.

Welcome to the On Pasture Library

Free Ebook!

Latest Additions

Most Read