From our February 2014 edition – here are some ideas that don’t age.
Getting water to livestock in pasture can be a challenge and farmers and ranchers have come up with all kinds of systems to get the job done. Since two (or more) heads are better than one, we thought we’d share some solutions from your fellow graziers over the next few months. Please feel free to add to the conversation by describing your successes (or failures) below, or how you might adapt these examples for your place. Got a video? Get in touch and we’ll share it with your On Pasture Community.
Hidden-Vue Farm’s Watering System
This certified organic, 550 acre farm near Lake Superior in Wisconsin has been in the Nortenun family for over 100 years. The raise organic, grass-fed, Red Devon cross cattle. You can read more about the farm here.
Their watering system uses about 4000 feet of 1″ line with risers every 150 feet. Quick disconnects make it easy to turn off the water, and then reconnect it at the next point. The water troughs are made of old tires which David made. “I started with a tire and cut out the sidewall on one side. I then measured the circumference of the bead and then had the local steel shop cut a piece of steel this size. Then I laid the steel on the bead of the tire and drilled holes through the steel and rubber and put bolts through them. Then just put silicon around the perimeter where the steel meets the rubber.”
Then he adds piping into and out of the tire trough. “I used a 3/4″ drill bit to drill the holes and used 3/4″ pipe and it fit so snugly I had to pound the pipe in with a hammer and it never really leaked after that.”
Since Powerflex was out of the 1″ Ts when he was building his system, he used 1″ to 3/4″ reducers and a small piece of 3/4″ pipe and then connected an extra 3/4″ “T” he had to it. He says, “It was just a workaround and now it goes directly from a 1″ pipe to the 1″ T. I had a friend who tried the new Powerflex and he doesn’t like them near as much as the older version. Hard to line up the cotter keys through the 2 holes you have to drill in the pvc post.”
Here’s a look at the system as David is moving the trough from one spot to the next.
Jericho Settlers Farm’s Simple Solution
If you live somewhere in the vicinity of Jericho, Vermont, you’d be able to buy vegetables, eggs, chicken, beef, lamb, pork and even salmon though the CSA programs offered by Jericho Settler’s Farm. Since 2002 they’ve raised 100% grassed and finished Rotokawa Red Devon beef in partnership with their friend, Chuck Lacy. In this video, Mark Fasching shows how they use a hose, a food grade barrel, and a Jobe Rojo Float Valve to make a simple watering system for their pastured livestock.
Rabbit-Eating Steers Are One of the Reasons On Pasture Exists
The other is a Conservation Innovation Grant from the Natural Resources Conservation Service that has covered more than half of the cost of bringing On Pasture to you. Without it, On Pasture would not be here today.
Our grant expires in November of 2019 and we’re currently working on another grant application for the next step in On Pasture’s future. Help us show that you’d like On Pasture to continue. Send in monthly support that we can use as match for grants. And, if your organization supports what we’re doing here, consider becoming a sponsor.
Oh – and here’s what rabbit-eating steers have to do with it. 🙂
Thanks to the National Grazing Lands Coalition for making this article possible. Click on over to see the great work they do for all of us. Thank them for supporting On Pasture by liking their facebook page.