Monday, December 9, 2024
HomeGrazing ManagementFencingInexpensive Electric Fencing Solutions - Courtesy of Nicaragua

Inexpensive Electric Fencing Solutions – Courtesy of Nicaragua

This post by Adrianna Robertson originally appeared on the Farmer-to-Farmer blog.

This is a Nicaraguan dairy cow.
This is a Nicaraguan dairy cow.

When working in countries with limited resources, creative and local solutions are key. In January 2015, Farmer-to-Farmer volunteer Wayne Burleson traveled to Nicaragua for a two week assignment to train local farmers in intensive rotational grazing and the installation of electric fences for herd management. During my assignment he identified two notable challenges for cattle farmers. First, electrical fencing supplies and other materials are difficult and uncommon to find locally. Second, the security of fencing equipment is an important concern for local farmers, as fencing equipment is very valuable and could be stolen.

To address these challenges, Wayne worked with farmers to identify local, inexpensive materials they could use for their fences that would be less likely to be stolen and more readily accessible. He then trained farmers on the installation and maintenance of these practical electric fencing systems.

Here Wayne describes some of the solutions he and the farmers developed:

Electric Fence Outrigger

I was working with a dairy farm that already had several permanent pastures fenced with barbed wire. I brought a fence charger with me from the USA and the electric fence wire was already provided. We just needed to invent some homemade insulators, gate handles, switches, lightweight electric fence posts and wire tighteners.

The dairy farm wanted to strip graze each permanent pasture with temporary electric cross fencing for a 12-hour pasture rotations system. This would give them greater pasture rotation flexibility, more uniform controlled grazing, and longer plant re-growth and recovery time. In the long term it would allow them to grow more forage with improved soil fertility.

The fence building ideas from this electric fencing project were cost effective and were phenomenally simple. Homemade fence insulators were designed, constructed and tested. They were made from high density old plastic pipes that were just lying around the dairy farm. I had suggested a solar fence charger, but they informed me that it would be stolen.

Here's the Electric Fence Outrigger the farmers and Wayne designed.
Here’s the Electric Fence Outrigger the farmers and Wayne designed.

We came up with a rough design of an electric fence outrigger to accommodate running a hot wire up steep hills next to an existing barbed wire fence. We took our idea to a local blacksmith who used a hammer and anvil to make a beautiful shaped wire rod outrigger. Once the design passed our testing on a live tree, it worked great, and we were successful at developing a uniquely made electric fence outrigger (see photo). This invention can be added to an electric fence wire after the wire has already been strung out. The curled end accommodates easy installation, and the cost was about one dollar compared to 3-dollar commercially made models.

Inexpensive Insulators

We made several other tree and wood post insulators that are so simple that I kick myself for not coming up with these uncomplicated ideas sooner after years of buying expensive insulators. All you do is cut off sections—approximately 5 inches long—of PVC pipe or HD black plastic pipe, drill two holes in each end, and drive a nail through the pipe and attach it to a wood post or tree. Next you drill a hole in the side of the plastic that is bigger than the diameter of the wire and cut a slot in the plastic pipe with a hacksaw to slide the fence wire into this hole.

Wire Tighteners

Here's the homemade wire tightener.
Here’s the homemade wire tightener.

We also constructed a wire tightener with an S curved chunk of rebar with an extended handle. To use, you just slide the loop over the fence wire, turn the whole S curved rebar to the desired tension, and lock the loop with the rebar handle.

Success!

Since completing my assignment, I received news from Leonardo Castro, one of the farmers who installed the new electric fence, that it has been successful at keeping his cattle confined. Leonardo also noted that he has already seen a difference in the quality of the land and regrowth of the grass after allowing the pastures to rest. With support from volunteers like Wayne, farmers in Nicaragua (and elsewhere) can be resourceful in identifying local materials and techniques to improve efficiency in production and natural resource management.

 

Your Tips Keep This Library Online

This resource only survives with your assistance.

5 COMMENTS

  1. When I was a kid we would use the neck portion of an old coke bottle as an insulator. Just break off the top, drive a nail in the post and hook your wire to it. Beer bottles worked just as well. Can’t get any cheaper than that.

    • Nice. Etching the bottle neck with a glass bottle cutter before snapping it off might make the process neater.

  2. Great info. Thanks. Any chance you could post a picture of the plastic pipe insulators? I’m not quite getting it from the written instructions.

  3. I love the ingenuity…I’m assuming that the plastic tubing is the last cog to go in place on the outrigger. And you staple it in place on a post or the bole of a tree. Does it take two or three staples to adequately secure the outrigger? Also, what gauge of wire is the outrigger made from?

Comments are closed.

Welcome to the On Pasture Library

Free Ebook!

Latest Additions

Most Read