Friday, March 29, 2024
HomeGrazing ManagementFencingImproving the Power and Reliability of the Charge for Your Solar Powered...

Improving the Power and Reliability of the Charge for Your Solar Powered Fencer

Dean Schneider of Bell Rule Genetics wasn’t satisfied with the typical all-in-one solar charged fencers he’d used. He’d tried a variety of brands and found they weren’t as reliable as he liked, he couldn’t get as much power out of them as he needed, and the batteries kept going bad. Since there was no electrical power on this place, solar was his only option. So he decided to figure out a solar powered set up that would let him power 3 miles of single, hi-tensile, wire with paddock subdivisions.

Here is a photo of the pastures served by the new solar fencer set up. The light yellow lines are hi-tensile electric and the darker gold lines are barbed wire. Blue is a water line.

 

In this video Brandon describes what he came up with – a set up that allows him to use a better fencer, and provide it with more, and more reliable power. It includes a 100 watt solar panel, a controller box and extra cables ($177), a 12 volt deep cycle battery, and a Stafix X6i charger. He chose the version with a remote control for $575 for the convenience of being able to turn it off and on from the paddocks. The same version without the remote is $385. He also chose use a fencer that operates off 12 volt, saving the cost of the inverter and using slightly less power.

When Brandon steps outdoors, the wind overpowers his voice temporarily. What he’s showing you is his 100 watt solar panel mounted on a DirectTV Satellite dish mount he had. He also points out the output box that comes with the panel. These boxes generally come with solar panels these days, (they didn’t back when I first started using them). The box comes with two wires, a positive and a negative with MC4 connectors on the ends. These are solar specific connectors and are weatherproof so that they can be mounted outdoors. He purchased extension cables for these wires to connect to the charge controller.

Dean and Brandon put this set up together with the help of the folks at Powerflex fence and Missouri Wind and Solar. Powerflex Fence have helped Dean determine the size of the fencer and panel he needed.

Though this particular set up isn’t portable, it is possible to make one that is portable. Here’s a picture of one I built back in the ’90s for the research project I was working on using goats to build firebreaks. This was before there was any other option but a do-it-yourself set up. (Thanks to my Dad, a mechanical engineer, for helping me figure out how to hook everything up!)

Dean and Brandon are working on a portable version out of a wooden box. Dean says, “if you wanted to get even a little fancier, it would be pretty easy to mount the setup on a small trailer to just pull around. We were lucky and had a good mounting spot on a shed.”

Your Tips Keep This Library Online

This resource only survives with your assistance.

Kathy Voth
Kathy Vothhttps://onpasture.com
I am the founder, editor and publisher of On Pasture, now retired. My career spanned 40 years of finding creative solutions to problems, and sharing ideas with people that encouraged them to work together and try new things. From figuring out how to teach livestock to eat weeds, to teaching range management to high schoolers, outdoor ed graduation camping trips with fifty 6th graders at a time, building firebreaks with a 130-goat herd, developing the signs and interpretation for the Storm King Fourteen Memorial trail, receiving the Conservation Service Award for my work building the 150-mile mountain bike trail from Grand Junction, Colorado to Moab, Utah...well, the list is long so I'll stop with, I've had a great time and I'm very grateful.

2 COMMENTS

  1. We have been setting up systems like this for many years. Most of the large ranchers use an x3or x6 with a 30 watt or 80 watt regulated solar panel. Very reliable and trust worthy systems.

  2. I just want to point out that it is the ‘and family’ who deal with our product planning and sales, not Jim Gerrish.

    If you want to know how to put a solar fence charger system together for specific application, you want to talk to Galen Gerrish, not Jim. If you call me, I will tell you to ‘talk to Galen’.
    He is the one who knows the products best.

    If you want to know how to best build a fence, talk to Ian Gerrish, not Jim. Ian is the one who has taken fence construction technique far beyond what I taught him as a boy.

    If you want to seed a pasture or a cover crop, talk to Dawn Gerrish. She is the one who knows the current best varieties and routinely plans mixes for all corners of the country with specificity that Jim overlooks.

    I appreciate the reference to ‘Jim Gerrish and family’ in the article, but it is the ‘and family’ who makes the details of our business work.

    Jim Gerrish

Comments are closed.

Welcome to the On Pasture Library

Free Ebook!

Latest Additions

Most Read